Globe Valve

Angle Globe Valve

Angle globe valve for flow regulation and shut-off in piping systems requiring a 90-degree change in direction.

Angle Globe Valve

Angle Globe Valve Manufacturer in Italy

Angle Globe Valves are designed to regulate and isolate fluid flow while accommodating a 90-degree change in pipeline direction. Their right-angle inlet and outlet arrangement combines the functions of a globe valve and a piping elbow, making them suitable for installations where space and piping layout are important considerations.

Euro Valve Italia is an Angle Globe Valve Manufacturer in Italy supplying designs for controlled flow adjustment and dependable shut-off in industrial piping systems.

Angle-Pattern Design and Working Principle

An Angle Globe Valve incorporates a disc and seat mechanism within a right-angle body. Turning the handwheel moves the disc toward or away from the seat, allowing the valve to regulate or stop fluid flow.

This arrangement can eliminate the need for a separate elbow in suitable piping layouts, although actual pressure loss depends on the internal flow passage and operating conditions.

Disc, Seat and Flow Regulation

The disc and seat provide the primary sealing arrangement. Guided disc movement helps maintain alignment, while metallic seating surfaces provide shut-off under the specified service conditions.

Different disc profiles may be selected for isolation or throttling duties. Continuous flow regulation requires suitable trim selection to manage differential pressure, fluid velocity and potential seat wear.

Installation and Operating Considerations

Angle Globe Valves are commonly used where a change in flow direction is required alongside flow regulation or isolation.

Installation should follow the specified flow direction and allow sufficient clearance for operation and maintenance. Valve selection must account for flow capacity, pressure differential and the required shut-off performance.

FAQ

Frequently Asked Questions

Find quick answers to common questions about this product.

An Angle Globe Valve has inlet and outlet connections positioned approximately 90 degrees apart, whereas a straight-pattern globe valve has connections arranged along the same pipeline axis. Both use a disc and seat mechanism for flow regulation and shut-off, but the angle-pattern design is particularly suitable for piping layouts requiring a directional change