HomeIndustriesMining & Mineral Processing

Mining & Mineral Processing

Precision-engineered industrial valves for Mining & Mineral Processing applications. Safe, durable, and certified solutions.

Mining and mineral processing systems handle some of the most challenging media found in industrial piping. Slurries containing ore, concentrates and suspended solids can affect valve seating, increase wear and make dependable isolation more difficult than in clean-fluid service. Tailings lines and process-water circuits introduce additional operating requirements across the same facility.

EuroValve Italia supplies mining and mineral processing valves for slurry transport, ore processing, dewatering, tailings handling and supporting water systems. Valve construction is selected according to the characteristics of the media, required shut-off performance and operating conditions of the line.

Valves for Slurry and Solids Handling

Slurry isolation is one of the most important valve duties within mineral processing. Suspended particles can collect around conventional seating areas or contribute to wear as the media passes through the valve, making the flow path and sealing arrangement important considerations.

Slurry Knife Gate Valves are suited to solids-bearing applications where effective isolation is required. Through-Conduit Knife Gate Valves provide an alternative flow-path arrangement, while Unidirectional and Bidirectional Knife Gate Valves allow the sealing configuration to be selected according to the direction of pressure and process requirements.

Valve Applications Across Mineral Processing

Application Valve Requirement Relevant Valve Types
Slurry transfer Isolation of solids-bearing media Slurry and Through-Conduit Knife Gate Valves
Ore and concentrate processing Isolation and flow management Knife Gate and Eccentric Plug Valves
Tailings systems Isolation under abrasive conditions Slurry and Bidirectional Knife Gate Valves
Process-water systems Isolation and flow management Butterfly and Plug Valves
Selected demanding services Shut-off under difficult media or temperature conditions Metal Seated Ball Valves

Managing Abrasion and Valve Wear

Abrasive service cannot be addressed by body material alone. Particle size and concentration, flow velocity, valve geometry, trim, seating surfaces and operating frequency can all influence wear. These factors should be considered together when selecting a valve for slurry or mineral-bearing media.

Metal Seated Ball Valves may be specified for selected duties where the operating temperature, media or shut-off conditions make a metal-seated construction appropriate. Eccentric Plug Valves provide another option for suitable isolation and flow-management applications.

Process Water and Supporting Systems

Not every valve in a mining facility operates in heavy slurry. Process-water circuits support washing, separation, pumping and other stages of mineral processing and can require a different valve configuration from the adjoining solids-handling system.

High Performance and Double Offset Butterfly Valves can provide compact isolation and flow-management options for appropriate water and utility services. Selection should reflect pressure, line size, operating frequency and the required shut-off performance.

Flow Control in Mineral Processing

Some process stages require modulation rather than simple on-off isolation. For these duties, the effect of solids, pressure differential and changing flow conditions should be considered when selecting the control-valve design and trim.

V-Notch Ball and Eccentric Rotary Control Valves are available for appropriate control applications where their flow characteristics and construction match the specified process conditions.

Selecting Valves for Mining Applications

Valve selection should begin with the actual media and operating data. Important parameters include solids concentration, particle characteristics, flow velocity, design pressure and temperature, line size, required shut-off or control function, operating frequency and actuation method.

Matching these conditions with the valve design, materials, seats and internal construction helps establish the appropriate configuration for slurry, tailings, mineral processing and process-water duties.

Recommended Products
10 products
Through-Conduit Knife Gate Valve
Through-Conduit Knife Gate Valve

Through-conduit knife gate valve with an unobstructed flow passage and manual or pneumatic operation.

Slurry Knife Gate Valve
Slurry Knife Gate Valve

Slurry knife gate valve with abrasion-resistant sealing, linear gate movement and pneumatic or hydraulic actuation.

Bidirectional Knife Gate Valve
Bidirectional Knife Gate Valve

Bidirectional knife gate valve with two-way shutoff, resilient seat options and manual or pneumatic operation.

Unidirectional Knife Gate Valve
Unidirectional Knife Gate Valve

Unidirectional knife gate valve with directional shutoff, resilient or metal seats and manual or pneumatic operation.

Eccentric Plug Valve
Eccentric Plug Valve

Eccentric plug valve with offset rotary plug, resilient sealing and manual or actuated operation.

Eccentric Rotary Control Valve
Eccentric Rotary Control Valve

Eccentric rotary control valve for modulating flow in high differential pressure and solids-bearing process applications

V-Notch Ball Control Valve
V-Notch Ball Control Valve

V-port ball valve with characterised flow control for throttling liquids, gases and compatible solids-bearing fluids.

High Performance Butterfly Valve
High Performance Butterfly Valve

Double-offset butterfly valve with pressure-assisted sealing for industrial isolation and throttling duties.

Double Offset Butterfly Valve
Double Offset Butterfly Valve

Double offset butterfly valve for industrial isolation, with carbon steel and stainless steel body options.

Metal Seated Ball Valve
Metal Seated Ball Valve

Metal seated ball valve with hardened sealing surfaces for high-temperature and abrasive industrial service.