Control Valve Manufacturer in Italy
As a Control Valve Manufacturer in Italy, EuroValve Italia provides electric and pneumatic control valves for accurate regulation of flow, pressure, temperature and other process variables. Each configuration combines the valve body, internal trim and actuator to respond to changing control signals and maintain the required process conditions.
Control valves can be configured with different Cv/Kv capacities, flow characteristics, trim designs, pressure ratings and material combinations. Electric actuation provides electrically driven positioning, while pneumatic actuation offers responsive modulation with configurable fail action for automated process systems.
What is a Control Valve?
A control valve is the final control element in a process loop. It receives a control signal and changes the available flow area by repositioning the valve closure element, allowing variables such as flow, pressure, temperature or liquid level to be regulated toward the required set point.
Unlike valves used primarily for on/off isolation, a control valve is selected for its ability to modulate flow under changing process conditions. Valve sizing, pressure drop, flow coefficient, trim characteristics and actuator response are therefore important parts of its specification.
Types of Control Valves
| Control Valve Type | Operation & Application |
|---|---|
| Electric Control Valve | Uses an electric actuator to position the valve in response to a control signal. Suitable for automated process systems requiring electrically driven modulation, positioning and integration with plant control systems. |
| Pneumatic Control Valve | Uses a pneumatic actuator to modulate the valve position using instrument air. Suitable for continuous process control and applications requiring responsive operation and defined fail action. |
Electric Control Valve
Electric control valves convert an electrical control signal into mechanical valve movement through an electric actuator. They are suited to installations where electrical power is available and can be integrated with automation systems for modulating positioning, position feedback and remote operation.
Pneumatic Control Valve
Pneumatic control valves use compressed instrument air to operate a diaphragm or piston actuator. A positioner controls actuator movement according to the input signal, allowing continuous modulation. Depending on the actuator and accessory arrangement, the valve can be configured for fail-open, fail-closed or fail-in-place behaviour.
Technical Specifications
| Parameter | Technical Data |
|---|---|
| Size Range | DN 15 to DN 450 |
| Pressure Ratings | PN 10, PN 16, PN 25, PN 40, PN 63, PN 100, PN 160, PN 250; ASME Class 150, 300, 600, 900, 1500 |
| Body Pattern | Straight Pattern, Angle Pattern |
| Body Construction | Cast, Forged |
| Trim Configuration | Single-Seated, Balanced Plug, Cage-Guided, Multi-Stage Trim |
| Flow Characteristics | Linear, Equal Percentage, Quick Opening |
| Flow Coefficient | Cv / Kv |
| End Connections | Raised Face Flanged, Ring Type Joint Flanged, Butt Weld, Socket Weld |
| Actuation | Electric, Pneumatic |
| Pneumatic Actuator Types | Diaphragm, Piston |
| Fail Action | Fail Open, Fail Closed, Fail in Place |
| Design / Performance Standards | IEC 60534 Series |
| Face-to-Face Dimensions | IEC 60534-3-1 |
| Butt-Weld Dimensions | IEC 60534-3-3 |
| Inspection & Testing | IEC 60534-4 |
| Seat Leakage Classification | IEC 60534-4, ANSI/FCI 70-2 |
Flow Characteristics and Trim
The internal trim determines how the valve changes flow as the actuator moves through its travel. Selecting the correct flow characteristic and trim arrangement is important for stable process control, pressure reduction and valve response.
| Control Feature | Function |
|---|---|
| Linear Characteristic | Provides an approximately proportional relationship between valve travel and inherent flow coefficient. |
| Equal Percentage Characteristic | Provides approximately equal percentage changes in flow coefficient for equal increments of valve travel. |
| Quick Opening Characteristic | Provides a relatively large increase in flow capacity during the initial portion of valve travel. |
| Cage-Guided Trim | Provides plug guidance and supports specialised flow-control and pressure-reduction arrangements. |
| Multi-Stage Trim | Divides pressure reduction across multiple stages for high differential-pressure applications. |
| Cv / Kv | Represents valve flow capacity and is a key parameter in control valve sizing and selection. |
Materials and Grades
Control valve materials are selected separately for the pressure-containing body and the internal trim. Body material is primarily determined by pressure, temperature and process-medium compatibility, while plug, seat, cage and stem materials must also account for fluid velocity, differential pressure, erosion and wear.
| Material Family | Relevant Grades |
|---|---|
| Carbon Steel | ASTM A216 WCB/WCC, ASTM A105/A105N, EN 1.0619 |
| Low-Temperature Carbon Steel | ASTM A352 LCB/LCC, ASTM A350 LF2 |
| Chrome-Moly Alloy Steel | ASTM A217 WC6/WC9, ASTM A182 F11/F22 |
| Stainless Steel | ASTM A351 CF8/CF8M/CF3/CF3M, ASTM A182 F304/F304L/F316/F316L, EN 1.4301, 1.4307, 1.4401, 1.4404 |
| Duplex Stainless Steel | UNS S31803/S32205, ASTM A182 F51, EN 1.4462 |
| Super Duplex Stainless Steel | UNS S32750/S32760, ASTM A182 F53/F55, EN 1.4410/1.4501 |
| High-Alloy Stainless Steel | 254 SMO / UNS S31254, 904L / UNS N08904, Alloy 20 / UNS N08020 |
| Nickel Alloys | Inconel 625 / UNS N06625, Hastelloy C276 / UNS N10276, Monel 400 / UNS N04400 |
| Control Valve Trim | 316 Stainless Steel, 410/420 Stainless Steel, 17-4 PH Stainless Steel, Stellite or other hard-faced trim materials |
Carbon and low-temperature steels cover many conventional process duties, while Chrome-Moly grades are relevant to elevated-temperature steam and power applications. Stainless, Duplex, Super Duplex and higher-alloy materials provide increased corrosion resistance for chemical, offshore and other aggressive process services.
Trim materials should be selected according to the process medium, pressure drop, temperature, fluid velocity, erosion potential and required shut-off performance. Hardened or hard-faced plug and seat surfaces can be specified for severe differential-pressure and erosive services.
Electric and Pneumatic Actuation
Electric actuators use an electric motor and drive mechanism to position the control valve. Depending on the actuator and control package, they can provide modulating positioning, position feedback and integration with plant automation systems.
Pneumatic actuators use instrument air to generate the force required to move the valve. Diaphragm and piston designs can be combined with positioners and accessories to achieve the required response and fail action.
Applications and Industries
| Control Duty | Typical Application |
|---|---|
| Flow Regulation | Chemical and Petrochemical Process Lines |
| Pressure Control | Oil & Gas and Process Systems |
| Steam Control | Power Generation and Industrial Steam Systems |
| Temperature Regulation | Heat Exchangers and Process Systems |
| Water Flow Control | Water Treatment, Power and Industrial Utilities |
| Gas Regulation | Gas Processing and Industrial Process Systems |
| High Differential Pressure Control | Power and Severe Process Applications |
Selecting the Right Control Valve
Control valve selection starts with the process medium, minimum, normal and maximum flow rate, inlet and outlet pressure, operating temperature and required Cv/Kv. These conditions determine the appropriate valve size, pressure rating, body and trim configuration and flow characteristic. Actuator selection should then consider the available electrical power or instrument-air supply, required response, control signal and fail action.
For technical selection or quotation, provide the process fluid, flow range, inlet and outlet pressures, temperature, line size, pressure rating, connection type, material requirements, control signal, actuator preference and required fail position.






