HomeSafety Relief Valve

Safety Relief Valve

Precision-engineered industrial safety relief valve. Certified Italian manufacturing, high safety standards, and project-ready design.

Safety Relief Valve Manufacturer in Italy

As a Safety Relief Valve Manufacturer in Italy, EuroValve Italia provides pressure-relieving valves designed to protect pressurised equipment and piping from excessive pressure. When system pressure reaches the specified set pressure, the valve opens to discharge the required fluid and helps prevent pressure from rising beyond the allowable operating limits of the protected system.

Safety relief valves are available in conventional spring-loaded, balanced bellows and pilot-operated configurations for steam, gas, vapour and liquid services. Selection depends on set pressure, required relieving capacity, back pressure, operating temperature, process medium and applicable pressure-protection requirements.

What is a Safety Relief Valve?

A safety relief valve is a self-actuated pressure-relieving device that opens when system pressure reaches a predetermined set pressure. The discharged fluid reduces excessive pressure in the protected equipment or piping, and the valve closes again after pressure returns to an acceptable level.

Unlike a pressure reducing valve, which regulates downstream pressure during normal operation, a safety relief valve remains closed during normal conditions and operates when pressure reaches its set point. Its primary function is overpressure protection.

Types of Safety Relief Valves

Valve Type Design & Application
Conventional Safety Relief Valve Direct spring-loaded design in which the spring force keeps the valve closed until pressure reaches the set point. Used for general pressure-relief duties where back-pressure conditions are suitable for a conventional design.
Balanced Bellows Safety Relief Valve Uses a bellows arrangement to reduce the influence of back pressure on valve operation and to isolate selected internal components from the process medium.
Pilot Operated Safety Relief Valve Uses a pilot system to control the main pressure-relief valve. Suitable for applications requiring close operation to system pressure or where operating and back-pressure conditions favour a pilot-operated design.
Steam Safety Valve Designed for overpressure protection in steam systems, boilers and associated steam equipment where the applicable valve design and code requirements are satisfied.

Technical Specifications

Parameter Technical Options
Valve Function Automatic Overpressure Protection
Operating Designs Conventional Spring-Loaded, Balanced Bellows, Pilot Operated
Service Media Steam, Gas, Vapour, Liquid and compatible process fluids
Seat Construction Metal Seated, Soft Seated where applicable
Body Construction Cast, Forged according to valve design
End Connections Raised Face Flanged, Ring Type Joint Flanged, Threaded and other connections according to valve design
Set Pressure Specified according to protected equipment and applicable pressure-relief requirements
Relieving Capacity Selected and sized according to required relieving load and service medium
Back Pressure Superimposed and Built-Up Back Pressure considered during valve selection
Design / Selection API 520, API 526 where applicable
Seat Tightness API 527 where applicable
Overpressure Protection ASME BPVC requirements where applicable to the protected equipment and service

How a Safety Relief Valve Works

In a direct spring-loaded safety relief valve, the closing force of the spring acts against the pressure force generated at the valve inlet. During normal operation, the valve remains closed. When inlet pressure reaches the specified set pressure, the pressure force causes the valve to open and discharge fluid from the protected system.

After sufficient pressure has been relieved, the valve reseats as system pressure decreases. The difference between set pressure and reseating pressure is an important operating characteristic and is commonly associated with the valve's blowdown.

Balanced bellows designs are used where the effects of back pressure need to be reduced, while pilot-operated designs use system pressure and a pilot mechanism to control opening and closing of the main valve.

Key Safety Relief Valve Parameters

Parameter Why It Matters
Set Pressure The inlet pressure at which the pressure-relief valve is set to begin its specified opening action.
Relieving Capacity The required discharge capacity must be sufficient for the applicable overpressure scenario and relieving conditions.
Overpressure The pressure increase above set pressure during the relieving condition must be considered according to the applicable design code and service.
Blowdown The difference between set pressure and the pressure at which the valve reseats after relieving.
Back Pressure Pressure present at the valve outlet can influence valve performance and the choice between conventional, balanced bellows and pilot-operated designs.
Seat Tightness Leakage performance is important when the system normally operates close to the valve set pressure.

Materials and Grades

Safety relief valve materials should be selected according to pressure, temperature, process medium, corrosion resistance and the mechanical requirements of pressure-containing and internal components. Material selection can differ between the body, nozzle, disc, spindle, spring, bellows and other internal parts.

Material Family Relevant Grades
Carbon Steel ASTM A216 WCB/WCC, ASTM A105/A105N, EN 1.0619
Low-Temperature Carbon Steel ASTM A352 LCB/LCC, ASTM A350 LF2
Chrome-Moly Alloy Steel ASTM A217 WC6/WC9, ASTM A182 F11/F22
Stainless Steel ASTM A351 CF8/CF8M/CF3/CF3M, ASTM A182 F304/F304L/F316/F316L, EN 1.4301, 1.4307, 1.4401, 1.4404
Duplex Stainless Steel UNS S31803/S32205, ASTM A182 F51, EN 1.4462
Super Duplex Stainless Steel UNS S32750/S32760, ASTM A182 F53/F55, EN 1.4410/1.4501
Nickel Alloys Inconel 625 / UNS N06625, Hastelloy C276 / UNS N10276, Monel 400 / UNS N04400
Internal Components Stainless Steel, precipitation-hardening stainless steel, nickel alloys and hard-faced seating surfaces according to service requirements

Spring, bellows and seating materials are selected separately based on operating temperature, process medium, corrosion resistance and set-pressure requirements.

Applications and Industries

Application Protection Requirement
Pressure Vessels Protection against pressure exceeding the allowable limits of the protected vessel
Oil & Gas Processing Overpressure protection for pressurised process equipment and piping
Petrochemical Processing Pressure relief for vessels, process lines and compatible fluid systems
Power Generation Overpressure protection for applicable steam and auxiliary pressure systems
Steam Systems Protection of steam equipment and piping against excessive pressure
Gas Processing Pressure relief for pressurised gas equipment and process systems

Selecting the Right Safety Relief Valve

Safety relief valve selection should consider the protected equipment, process medium, set pressure, relieving pressure and temperature, required relieving capacity, back pressure and discharge conditions. These parameters influence the required valve design, orifice area, inlet and outlet size, material construction and seating arrangement.

For technical selection or quotation, provide the process medium, operating pressure and temperature, required set pressure, relieving conditions, required capacity, back pressure, connection requirements and applicable design code.

Safety Relief Valve Products
4 products
Thermal Relief Valve
Thermal Relief Valve

Thermal relief valve for releasing excess pressure caused by liquid expansion in isolated pipelines.

Pilot Operated Safety Relief Valve
Pilot Operated Safety Relief Valve

Pilot-controlled safety relief valve for overpressure protection in gas, vapour and liquid systems.

Balanced Bellow Safety Relief Valve
Balanced Bellow Safety Relief Valve

Spring-loaded safety relief valve with balanced bellows for backpressure compensation and bonnet isolation.

Conventional Safety Relief Valve
Conventional Safety Relief Valve

Spring-loaded safety relief valve with calibrated set pressure and automatic overpressure protection.

Safety Relief Valve Manufacturer in Italy- Custom Valve