AWWA Eccentric Plug Valve
Eccentric plug valve for isolation and flow control in municipal wastewater, sludge and water pipelines.

AWWA Eccentric Plug Valve Manufacturer in Italy
AWWA Eccentric Plug Valves are quarter-turn valves designed for isolation and controlled flow in municipal water and wastewater pipelines. Their eccentric plug construction allows the sealing surface to move away from the seat during opening and approach it during closure. This reduces continuous rubbing between the sealing surfaces and makes the design suitable for applications involving suspended solids, sludge and wastewater. An AWWA Eccentric Plug Valve Manufacturer in Italy must account for shutoff performance, plug construction, operating torque and applicable waterworks requirements. Valve selection depends on pipeline pressure, fluid characteristics, required sealing direction and the expected frequency of operation. The valve uses an offset plug that rotates approximately 90 degrees between the open and closed positions. During opening, the eccentric movement lifts the plug sealing surface away from the body seat, reducing contact and friction. During closure, the plug rotates toward the seat to establish shutoff. The eccentric arrangement helps reduce seat wear compared with designs that maintain continuous sealing contact throughout rotation. Depending on the construction, the plug may incorporate an elastomeric covering or another suitable sealing arrangement. Ductile iron and cast iron are commonly used for waterworks valve bodies, while corrosion-resistant internal components may be specified according to fluid conditions. The plug, shaft, bearings and sealing components must be selected to withstand the required operating pressure and torque. Eccentric plug valves may be operated using manual levers, gear operators, pneumatic actuators or electric actuators, depending on valve size and application. For wastewater and sludge service, internal geometry and suitable sealing materials are important considerations because suspended solids can affect valve operation and closure. AWWA C517 addresses resilient-seated cast-iron eccentric plug valves for waterworks service. The applicable edition and project requirements should be considered when specifying valve construction and testing. Eccentric plug valves are used in wastewater treatment plants, sewage pumping stations, sludge handling systems and municipal pipeline networks. Valve selection should consider working pressure, flow direction, shutoff requirements, end connections and actuator sizing. For applications requiring bidirectional shutoff or operation against substantial differential pressure, the manufacturer's verified performance limits should be reviewed before installation.Eccentric Plug Design and Shutoff Operation
Plug Construction, Materials and Operation
AWWA Standards and Pipeline Applications
Frequently Asked Questions
Find quick answers to common questions about this product.
An AWWA eccentric plug valve uses an offset rotating plug that moves away from its seat during opening, while a butterfly valve uses a rotating disc to regulate or isolate flow. Eccentric plug valves are often selected for wastewater and sludge applications involving suspended solids. Butterfly valves may be preferred where compact construction and lower operating torque are priorities.




