Air Release Valve

Combination Air Valve

Combination air valve for automatic air release, large-volume air discharge and vacuum protection in water pipelines.

Combination Air Valve

Combination Air Valve Manufacturer in Italy

Combination Air Valves manage air movement in pressurised water pipelines during filling, draining and normal operation. They combine large-orifice air discharge and admission with small-orifice automatic air release. These functions help prevent air accumulation, reduce flow restrictions and limit excessive vacuum conditions in water transmission and distribution systems.

Euro Valve Italia provides combination air valve configurations for water and industrial utility applications. When selecting a Combination Air Valve Manufacturer in Italy, important considerations include air-flow capacity, operating pressure, float mechanism design and material compatibility. The valve must be sized according to pipeline conditions and the required air discharge and admission rates.

Air Release, Air Discharge and Vacuum Protection

Combination air valves perform three functions through their large and small air passages.

During pipeline filling, the large orifice discharges displaced air. During draining or negative-pressure conditions, it admits air to help prevent excessive vacuum formation.

The small automatic air-release mechanism removes accumulated air while the pipeline remains pressurised.

These functions support pipeline operation, although additional surge protection may be required where rapid pressure changes occur.

Float Mechanism and Internal Construction

The valve operates automatically through float movement and changes in water level inside the chamber.

As water enters the valve, the float rises and closes the appropriate air passage. When air accumulates and displaces water, the automatic release mechanism opens to discharge it.

Depending on the construction, separate floats or an integrated mechanism may control large-volume air movement and automatic air release.

Ductile iron and cast iron bodies are commonly used for water service, while stainless steel internal components and suitable elastomeric seals may be selected for corrosion resistance and sealing performance.

Operating Pressure, Sizing and Installation

Combination air valves operate without external actuators, using internal float mechanisms and pressure changes.

Selection depends on operating pressure, pipeline diameter, filling and draining rates, elevation profile and required air-flow capacity.

Air discharge and admission performance curves should be reviewed to determine the correct valve size, since connection diameter alone does not establish air-handling capacity.

Installation locations typically include pipeline high points and sections where air accumulation or negative pressure may occur. Final placement should follow the hydraulic design of the pipeline.

FAQ

Frequently Asked Questions

Find quick answers to common questions about this product.

A combination air valve performs large-volume air discharge, air admission and automatic air release. An automatic air release valve primarily removes small quantities of accumulated air from a pressurised pipeline. Combination valves are suitable where both air/vacuum functions and continuous air release are required.