Lubricated Plug Valve
Sealant-injected plug valve with quarter-turn operation, pressure-assisted sealing and manual or gear actuation.

Lubricated Plug Valve Manufacturer in Italy
Lubricated Plug Valves use a specially formulated sealant introduced between the plug and body to support tight shutoff and reduce friction during operation. The sealant is distributed through machined channels around the plug, forming a sealing film that helps limit internal leakage while allowing the plug to rotate between open and closed positions. This construction is commonly used for pipeline isolation in oil, gas and petrochemical applications where pressure containment and serviceable sealing arrangements are important. Euro Valve Italia is a Lubricated Plug Valve Manufacturer in Italy, offering configurations with carbon steel, stainless steel and suitable alloy steel bodies. Valve selection considers operating pressure, fluid compatibility, temperature, sealant characteristics and the required operating mechanism. The valve incorporates an injection fitting connected to internal sealant distribution channels. Sealant is introduced under controlled pressure and distributed across the plug sealing surfaces. This arrangement helps establish a sealing film between the plug and body while reducing direct metal-to-metal contact during operation. The injection system may also help restore sealing performance where minor surface wear has occurred, provided the valve remains within its allowable operating and maintenance limits. Sealant selection is critical because the injected compound must be compatible with the process fluid and operating temperature. Lubricated plug valves commonly use a tapered or cylindrical plug with a machined flow passage. Rotation of the plug aligns the passage with the pipeline when open and blocks the flow path when closed. In tapered plug designs, the seating geometry and axial loading influence sealing contact and operating torque. Some constructions incorporate pressure-balancing or plug-lifting arrangements to assist operation. The sealing mechanism relies on the interaction between the plug surface, valve body and injected sealant. Proper sealant distribution is therefore essential for maintaining the intended shutoff performance. Lubricated plug valves operate through approximately 90 degrees of rotation. Manual levers may be used for smaller configurations, while gearboxes and powered actuators can accommodate higher operating torque. Routine maintenance may include sealant replenishment, inspection of injection fittings and verification of operating torque. The frequency of sealant injection depends on the process fluid, valve design, operating conditions and service history. For valves installed in hazardous fluid systems, sealant injection and maintenance procedures must follow the manufacturer's pressure and safety requirements.Sealant Injection and Lubrication System
Plug Construction and Pressure Sealing
Operating Mechanism and Maintenance Requirements
Frequently Asked Questions
Find quick answers to common questions about this product.
Sealant injection frequency depends on the valve design, operating conditions, fluid properties and frequency of operation. Some installations require periodic replenishment, while others may operate for longer intervals between maintenance activities. The manufacturer's maintenance instructions should determine the appropriate schedule.




