Trunnion Mounted Ball Valve
Trunnion Mounted Ball Valve with fixed ball support, spring-loaded seats and full-bore options for pipeline isolation.

Trunnion Mounted Ball Valve Manufacturer in Italy
A Trunnion Mounted Ball Valve uses fixed mechanical supports to hold the ball in position, allowing the seat rings to move independently against its sealing surface. Unlike a floating ball arrangement, line pressure does not push the ball directly into the downstream seat. This makes trunnion-mounted construction particularly suitable for large-diameter valves, high differential pressures and applications where operating torque must be controlled. For projects sourcing a Trunnion Mounted Ball Valve Manufacturer in Italy, Euro Valve Italia covers this valve category for pipeline and industrial isolation requirements.
Fixed Ball Construction and Seat Performance
The ball rotates on upper and lower trunnion supports, with bearings helping to reduce friction during operation. Spring-loaded seat rings maintain initial contact with the ball, while process pressure contributes to sealing.
Single-Piston-Effect (SPE) seats allow excess body cavity pressure to relieve under defined conditions. Double-Piston-Effect (DPE) seats provide pressure-assisted sealing in both directions and require appropriate cavity pressure protection.
Pipeline Isolation and Operating Options
Trunnion Mounted Ball Valves are widely used in natural gas transmission, crude oil pipelines, compressor stations and petrochemical processing systems. Full-bore designs accommodate compatible pipeline inspection and cleaning pigs, while reduced-bore configurations are used where a smaller flow passage is acceptable.
Depending on the service, these valves may incorporate Double Block and Bleed (DBB) arrangements, anti-static continuity, fire-safe sealing and emergency sealant injection. Gear-operated, pneumatic, electric and hydraulic actuation can be selected according to operating torque and shutdown requirements.
Frequently Asked Questions
Find quick answers to common questions about this product.
Trunnion-mounted construction is generally preferred when larger valve sizes, higher differential pressures or actuator torque requirements make floating-ball designs less practical. The supported ball reduces pressure-induced movement, while spring-loaded seats maintain sealing contact. Selection should consider pressure class, valve diameter, operating frequency and required shut-off performance.




