Marine vessels contain multiple piping systems that require valves for isolation, flow control and reverse-flow prevention. EuroValve Italia supplies marine valves for shipbuilding projects and onboard systems including seawater cooling, ballast, bilge, fuel and utility lines.
Marine valve selection must account for the fluid being handled, available installation space, operating pressure and temperature, corrosion exposure and the function of the piping system. LNG and other low-temperature services introduce additional requirements for materials, sealing and valve construction.
Valve Applications on Marine Vessels
Seawater and Cooling Systems
Butterfly, Gate and Check Valves can be used for isolation and flow management in seawater intake, circulation and cooling-water systems. Material selection is particularly important where components are exposed to seawater or other corrosive environments.
Ballast and Bilge Systems
Ballast systems require effective isolation and flow routing during filling and discharge, while bilge systems require controlled movement of collected water. Butterfly, Gate and Check Valves can perform isolation and non-return functions within these piping arrangements.
Fuel and Utility Lines
Ball, Gate and Globe Valves can be selected for fuel transfer and auxiliary piping where shut-off or flow regulation is required. Check Valves are used where reverse flow through pumps or connected equipment must be prevented.
Marine Valve Selection Considerations
| Shipboard Service | Primary Requirement | Relevant Valve Families |
|---|---|---|
| Seawater and cooling | Isolation and corrosion consideration | Butterfly, Gate and Check Valves |
| Ballast and bilge | Flow isolation and non-return | Butterfly, Gate and Check Valves |
| Fuel and utility piping | Isolation and flow regulation | Ball, Gate and Globe Valves |
| Pressure-sensitive equipment | Overpressure protection | Safety Relief Valves |
| LNG and low-temperature service | Operation at cryogenic temperatures | Cryogenic Ball, Gate, Globe and Check Valves |
Materials for Marine Environments
Material selection depends on the fluid, temperature, pressure and level of corrosion exposure. Depending on the service, valve materials may include Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, Aluminium Bronze and other corrosion-resistant alloys.
For cryogenic duties, valve body materials, trim, seats, seals and stem arrangements must be selected specifically for the operating temperature and project requirements. Cryogenic valve configurations should therefore be specified for the actual low-temperature service rather than treated as standard marine valves.
Valves for Shipbuilding Projects
Valve selection should be based on the vessel piping system, fluid characteristics, pressure and temperature, materials, end connections, operation and applicable project requirements. EuroValve Italia can supply manual, gear-operated and actuated valve configurations according to the requirements of the specified marine service.
