AWWA Butterfly Valve
AWWA butterfly valve for quarter-turn flow isolation in municipal water transmission and distribution pipelines.

AWWA Butterfly Valve Manufacturer in Italy
AWWA Butterfly Valves are quarter-turn isolation valves used in municipal water transmission, distribution and pumping systems. They feature a circular disc mounted on a rotating shaft that controls the passage of water through the pipeline. When fully open, the disc aligns approximately with the flow direction, while a 90-degree rotation moves it into the closed position against the valve seat. Large-diameter waterworks projects often require an AWWA Butterfly Valve Manufacturer in Italy capable of meeting specified disc construction, resilient seating and operating torque requirements. Valve selection also depends on working pressure, flow velocity and shutoff performance, particularly in transmission mains where reliable isolation is essential. The butterfly valve controls water flow through the rotation of a disc positioned inside the valve body. As the disc rotates toward the open position, the available flow area increases. During closure, the disc moves against the sealing surface to restrict flow and establish shutoff. The quarter-turn operating principle provides a compact alternative to many linear-motion isolation valves, particularly in large-diameter pipeline installations. AWWA butterfly valves commonly use ductile iron or cast iron bodies with protective coatings suitable for waterworks service. The disc may be manufactured from ductile iron or another specified material, while stainless steel shafts and corrosion-resistant components can be selected according to operating conditions. Resilient sealing arrangements use an elastomeric seat to establish closure between the disc and valve body. The seating configuration and shaft arrangement vary according to the selected design. Manual gear operators and electric or pneumatic actuators may be used depending on valve size, required operating torque and automation needs. AWWA C504 establishes requirements for rubber-seated butterfly valves used in waterworks applications. The applicable edition should be considered when evaluating valve construction, performance and testing. These valves are commonly installed in municipal water transmission mains, pumping stations, water treatment facilities and distribution networks. Selection should consider maximum working pressure, differential pressure, flow velocity and installation orientation. For automated systems, actuator sizing must account for the required operating torque throughout the valve's travel. Opening and closing speeds should also be evaluated where pressure transients may occurs.Quarter-Turn Disc Operation
Disc, Shaft and Resilient Seating
AWWA C504 and Waterworks Applications
Frequently Asked Questions
Find quick answers to common questions about this product.
AWWA C504 covers rubber-seated butterfly valves used in waterworks applications. It establishes requirements for applicable valve construction, performance and testing. Compliance should be verified against the specified edition and the manufacturer's supporting documentation.




