Jacketed Ball Valve
Jacketed ball valve with steam or thermal oil heating for temperature-sensitive and viscous process media.

Jacketed Ball Valve Manufacturer in Italy
Jacketed Ball Valves are designed for viscous and temperature-sensitive process media that require heat to be maintained through the valve body. A separate jacket around the body permits the circulation of steam, hot water or thermal oil without contact between the heating medium and process fluid.
Euro Valve Italia is a Jacketed Ball Valve Manufacturer in Italy supplying full-jacket and partial-jacket designs with soft-seated or metal-seated construction for industrial process service.
Jacket Design and Construction
Full Jacket Design
The heating jacket extends around the main valve body to increase the available heat-transfer area. Depending on valve construction, oversized end flanges can be provided to maintain sufficient clearance between the jacket and flange bolting.
Partial Jacket Design
The jacket covers the centre body section while the end-flange area remains unjacketed. This configuration is suitable where standard pipeline flange dimensions need to be retained or complete jacket coverage is not required.
Full Bore and Reduced Bore Design
Full-bore construction provides a flow passage close to the pipeline internal diameter, reducing flow restriction and areas where viscous media can accumulate. Reduced-bore construction is available where a full pipeline bore is not required.
The jacket circuit remains separate from the process flow path. Process-side pressure and temperature and jacket-side operating conditions are therefore considered independently during valve selection.
Seat Configuration
Soft Seated
PTFE or RPTFE seats can be used where the operating temperature, pressure and chemical compatibility remain within the limits of the selected seat material.
Metal Seated
Metal-seated construction is available for elevated-temperature and abrasive services where polymeric seats are unsuitable. Hard-faced ball and seat surfaces can be specified according to the process conditions.
Operation and Actuation
Jacketed Ball Valves can be supplied with lever or gear operation and with pneumatic or electric actuators for automated on/off service. Pneumatic configurations can be supplied with double-acting or spring-return actuators according to the required fail position and operating conditions.
Process Media
Typical media include bitumen, asphalt, heavy oils, wax, paraffin, resins, polymers, molten sulphur, tar, pitch and other heated or high-viscosity process fluids where temperature maintenance through the valve body is required.
Ordering Information
For valve selection, specify size, pressure class, process medium, operating temperature, body and trim material, full or partial jacket, heating medium, jacket pressure and temperature, seat construction, end connection and required method of operation.
Frequently Asked Questions
Find quick answers to common questions about this product.
A steam jacketed ball valve incorporates a separate jacket around the valve body through which steam circulates to maintain process temperature. A standard ball valve does not provide this external heating arrangement.




