AWWA Swing Check Valve
AWWA swing check valve with hinged-disc operation for automatic backflow prevention in waterworks pipelines.

AWWA Swing Check Valve Manufacturer in Italy
AWWA Swing Check Valves are non-return valves designed to prevent reverse flow in municipal water transmission, distribution and pumping systems. They use a hinged disc that opens under forward-flow pressure and returns toward the seat when flow decreases or reverses. This automatic action helps protect pumps and connected pipeline equipment against unintended backflow. An AWWA Swing Check Valve Manufacturer in Italy must consider disc movement, seating performance, working pressure and applicable waterworks standards when specifying valves for pumping stations and water distribution networks. Selection also depends on pipeline orientation, flow velocity and the potential for pressure transients during pump shutdown. The valve contains a disc mounted on a hinge or pivot assembly that allows movement between the open and closed positions. During forward flow, hydraulic forces lift the disc away from the seat, allowing water to pass through the valve. When flow velocity decreases, the disc moves toward the closed position under gravity and hydraulic forces. Reverse differential pressure then helps maintain closure. Swing check valves operate automatically without external actuation. However, disc closure is influenced by flow conditions and may not occur before reverse flow begins. The internal assembly generally includes a hinged disc, hinge pin, seating surface and suitable sealing components. Ductile iron and cast iron are commonly used for waterworks valve bodies. The disc and hinge components may incorporate corrosion-resistant materials or protective coatings according to water quality and service conditions. Resilient-seated designs use suitable elastomeric sealing surfaces, while other constructions may employ metal seating arrangements. The selected seat design, hinge geometry and disc weight influence leakage performance, opening characteristics and closing behaviour. AWWA C508 provides requirements for swing check valves used in waterworks service. The applicable edition, construction requirements and testing provisions should be reviewed when preparing project specifications. AWWA swing check valves are commonly installed on pump discharge lines and water transmission pipelines where reverse flow must be prevented. Correct installation requires attention to flow direction, mounting orientation and adequate flow conditions to maintain stable disc operation. In systems exposed to rapid pump shutdown or significant pressure transients, a conventional swing check valve may require additional surge-control measures or an alternative check valve design with faster closure characteristics.Hinged Disc Operation and Backflow Prevention
Disc Assembly and Sealing Construction
AWWA Requirements and Pumping Applications
Frequently Asked Questions
Find quick answers to common questions about this product.
AWWA C508 covers swing check valves intended for waterworks service. It establishes requirements for applicable valve construction, materials and testing. Compliance must be verified against the specified edition and the actual valve design.




