How to Select the Right Industrial Valve for Your Application

Selecting an industrial valve involves more than matching its size to a pipeline. The valve must suit the required function, process fluid, operating pressure, temperature and flow conditions. EuroValve Italia provides industrial valve solutions for different applications, and this guide explains the key factors to consider when selecting valves.
Understanding Different Industrial Valve Types:
The valve function should be established before looking at materials or pressure ratings, as the required duty determines which valve design is appropriate.
Ball Valve: Mostly chosen for quick shut-off/isolation as the quarter turn movement of this valve makes it quick to open or close. It comes in various types like floating, trunnion mounted, fully welded, metal seated and cryogenic ball valves.
Gate Valve: Usually chosen for isolating pipelines or process lines with the need for full-flow isolation. Various types include wedge gate, slab gate, expanding and pressure seal types.
Globe Valve: Chosen when there is a requirement for throttling or flow control. Various types include straight globe, Y pattern and angular types.
Butterfly Valve: Normally chosen where isolation is required with a small size and light weight. This valve has a disc that rotates quarter turn for operation. Concentric, double offset and triple offset types can be considered.
Check Valve: Chosen to isolate against reverse flow automatically without the need for any manual intervention. Swing, dual plate, lift and tilting disc types are some of the check valves.
Control Valve: Chosen when the process variable needs to be controlled.
How to Select a Valve for Your Pipeline?
The process of knowing how to select a valve is made easy through sequencing. Anyone who is planning on learning about how to select an industrial valve may follow the below procedure for setting down the minimum standards prior to choosing a valve design.
Step 1: Identify the Valve Function
The first step is to determine the operation that the valve should perform. This could be isolation, regulation, non-returning of the fluid flow or process control.
Step 2: Determine the Flowing and Operating Conditions
The following are the fluid properties and operating conditions that have to be taken into account: process fluid, compatibility, pressure, temperature, flow rate, and pressure drop.
Step 3: Verify Pipe Diameter and Pressure Temperature Ratings
Pipe diameter and pressure temperature ratings should be established prior to valve selection.
Step 4: Select Compatible Materials
Choose the material of the body, seats, and trim based on the properties of the fluid, temperature, pressure, and corrosiveness. Choosing the right material for the valves ensures that the valves are appropriate for the conditions.
Step 5: Confirm the End Connections and Mode of Operation
As the final step, the end connection and mode of operation shall be selected based on the design of the valve and piping system as well as the mode of operation. In more complicated scenarios, other specifications may be necessary in case of cryogenic, fire safe, sour service, and fugitive emission systems.
The main valve selection criteria depend on the actual operating conditions rather than the valve name alone. Before specifying a valve, establish: Process fluid and chemical compatibility Normal and maximum flow rate Design and operating pressure Design and operating temperature Differential pressure DN/NPS pipeline size Allowable pressure drop Required shutoff or control performance Material and seat requirements End connection Manual or automated operation Applicable standards These parameters determine the appropriate construction, rating and materials. Valve selection by pressure and temperature is most important for oil and gas, chemicals, petrochemicals, power, steam and cryogenics applications. Valve pressure and temperature ratings should always be considered together as sometimes maximum allowable pressure depends on increase in temperature. Pressure ratings of valves according to valve classification include PN16, PN25, PN40, PN63 and PN100 as well as ASME classes 150, 300, 600, 800, 900, 1500 and 2500. These are examples of materials, ratings, connections and standards used for applicable valve constructions. The exact combination depends on the valve type, design and service requirements. Proper valve sizing considerations go beyond matching the valve to the pipeline diameter. Flow rate, velocity, pressure drop, and bore shape are important considerations for isolation valves. In this regard, full bore ball valves could offer better flows and may be ideal in cases of pipeline pigging operations. In the case of control valves, extra calculations have to be carried out considering flow rate, inlet and outlet pressures, fluid density, viscosity and Cv/Kv of the control valve. Excessively large control valves could result in inaccurate regulation while undersized valves may cause pressure losses and velocity problems. Valve material selection should take into account the fluid nature and operating conditions. For general purposes, carbon steel materials are suitable, while stainless steel, Duplex, Super Duplex, and nickel-based materials are used for corrosive, high temperature, and special purposes. End connection should suit both the piping system and the applicable valve design. Depending on the type of valve, there are a variety of end connections possible: raised face flanges, ring type joint flanges, butt weld, socket weld and thread. Wafer and lug arrangements are used with applicable valve designs and should not be treated as interchangeable with conventional flanged or welded connections. Manual operation is provided by means of lever, handwheel or gearbox. For larger valves and remote control systems there is need for pneumatic or electric actuation with size of actuator chosen according to torque/thrust requirements of the valve. Prior to specifying the valve, proceed with the following: Establish whether the valve is needed for isolation, regulation, or backflow prevention purposes. Establish the process fluid, flow rate, pressure and temperature. Determine the appropriate size and pressure rating. Select compatible body, trim and seat materials. Confirm end connections, operation and applicable standards.Valve Selection Criteria:
Valve Selection by Pressure and Temperature:
Technical Specifications to Check:
Valve Sizing Considerations:
Materials, Ends and Operation:
A Practical Valve Selection Checklist:
Table of Contents
- Understanding Different Industrial Valve Types:
- How to Select a Valve for Your Pipeline?
- Step 1: Identify the Valve Function
- Step 2: Determine the Flowing and Operating Conditions
- Step 3: Verify Pipe Diameter and Pressure Temperature Ratings
- Step 4: Select Compatible Materials
- Step 5: Confirm the End Connections and Mode of Operation
- Valve Selection Criteria:
- Valve Selection by Pressure and Temperature:
- Technical Specifications to Check:
- Valve Sizing Considerations:
- Materials, Ends and Operation:
- A Practical Valve Selection Checklist:


