HomeBlogPN vs ASME Class: Understanding Industrial Valve Pressure Ratings

PN vs ASME Class: Understanding Industrial Valve Pressure Ratings

November 03, 20265 min read
PN vs ASME Class: Understanding Industrial Valve Pressure Ratings

PN and ASME Class are two different codes for designating pressure rated valves and pipe fittings. Since their ratings are based on different standards, these two are not comparable and are not meant to be used interchangeably.

The PN vs ASME Class comparison is important when selecting valves for industrial piping systems because allowable pressure depends on factors such as material, temperature and the applicable standard. EuroValve Italia is a leading supplier of industrial valves for ball, gate, globe, check, butterfly, and control valves.


What Do PN and ASME Class Mean?

PN and ASME Class are different systems used to identify pressure-rated valves and piping components.

PN means nominal pressure and is commonly used with European standards. Some of the typical ratings are PN10, PN16, PN25, PN40, PN63, PN100, and PN160.

The ASME standard classification has different pressure ratings like Class 150, Class 300, Class 600, Class 900, Class 1500 and Class 2500.

However, it is important to note that the number in the ASME classification is not in psi.

PN vs ASME Class: Are They Equivalent?

No correlation exists between PN and ASME classes. The compatibility of the valve is dependent on material, temperature, construction type, and design considerations.

It is inappropriate to make substitutions between the two classes because the classification of the pressure classes under PN is entirely different than that under ASME. The pressure-temperature rating must be checked prior to the substitution.

This is particularly important in cases where the components of the piping system designed according to European and ASME specifications need to be connected together.


PN16 vs Class 150:

Comparison of PN16 versus Class 150 is typical when comparing European and ASME piping systems.

PN16 and Class 150 are separate pressure ratings systems that should not be equated directly with each other. Pressure temperature ratings, materials, and flanges have to be compared before making a choice of valves.

Dimensions of flanges could be different. The arrangement of bolts holes, outer diameter, and flange faces have to be compared with relevant standards.

For example, when selecting a Ball Valve for a project using PN-rated piping, verify the valve's pressure rating, material and flange compatibility against the project requirements.

What Does a PN40 Valve Rating Mean?

The use of PN40 means that there is an allowable pressure based on the standards in question. The allowable pressure will be dependent on the pressure-temperature rating, the material, and the construction of the valve.

PN40 and ASME Class 300 cannot be considered as equivalent. The allowable pressure of the valve needs to be verified before any decisions can be made.

The same principle applies when specifying a Gate Valve for higher-pressure service:  confirm the valve's suitability against the project specification rather than assuming that Class 300 is equivalent to PN40.

Understanding ASME Pressure Class:

For selecting industrial valves, use the pressure rating system needed for the project and make sure that the pressure value allowed is known for the design temperature.

In case of European systems, verify the correct PN rating. In case of ASME systems, verify the pressure rating according to the material and temperature ratings. If the two systems join together, check compatibility both from pressure and dimension aspects instead of numerical comparisons.

Valve Pressure Classification and Temperature:

Temperature has a direct effect on valve pressure rating.

The permissible pressure of a valve will vary depending on the temperature in relation to its material and construction as well as the standard of pressure-temperature relationship that applies. It is for this reason that the pressure rating of a valve should be stated alongside the design temperature.

Parameter

Typical Options

PN ratings

PN10, PN16, PN25, PN40, PN63, PN100, PN160

ASME classes

Class 150, 300, 600, 900, 1500, 2500

Valve materials

Carbon steel, stainless steel, Duplex, Super Duplex, alloy materials

Pressure basis

PN nominal pressure or ASME pressure-temperature rating

Temperature

Allowable pressure varies with material and temperature

Flange standards

EN 1092-1, ASME B16.5 and applicable project specifications

Valve design

ASME B16.34 and applicable product standards

Testing

API 598 or applicable testing standard

Pressure Class and Flange Compatibility:

Pressure rating is only one part of connection compatibility.

Valves may possess the right pressure rating yet be inappropriate due to mismatched flanges with the connecting pipe.

Before specifying a flanged valve, check:

  • Nominal size

  • Pressure designation

  • Flange standard

  • Facing type

  • Bolt-hole arrangement

  • Face-to-face dimensions

Two valves may both appear suitable for the required operating pressure but still have incompatible flange drilling or facing arrangements. Pressure suitability does not automatically mean installation compatibility.

How to Specify the Correct Valve Rating?

Start with the pressure and temperature design.

After that comes the definition of the valve type, valve body material, type of connection, and design code. In case of the ASME work, specify the valve class needed and make sure of the pressure-temperature rating of the selected valve body material.

For a European project, specify the proper PN rating of the valve.

Where PN and ASME systems connect, check the complete interface rather than selecting the closest numerical rating.

Understanding the Difference Between PN and Class:

In the case of the specification of industrial valves, choose the pressure rating system according to the project requirements and ensure that the pressure rating is appropriate for the design temperature.

If the system is a European one, make sure that you know the appropriate PN rating. In the case of the ASME system, ensure that the pressure class rating corresponds to the materials and temperatures used.



Expert Valve Guidance
Need Help Specifying the Right Valve?

Our Italian engineering team provides custom valve selection, technical drawings, and project-specific quotes within 24 hours.

Contact Our Engineers
PN vs ASME Class: Valve Pressure Ratings Explained