HomeBlogValve Material Selection for Industrial Applications: Grades & Corrosion Resistance

Valve Material Selection for Industrial Applications: Grades & Corrosion Resistance

November 10, 20267 min read
Valve Material Selection for Industrial Applications: Grades & Corrosion Resistance

Valve material selection requires evaluating the process fluid, operating pressure, temperature and environmental conditions. The materials selected for the valve body and trim need to have sufficient strength and also be compatible with the process service conditions.

Industrial valves should thus be chosen depending on the service conditions in the process rather than being picked based on whether they are the most corrosion resistant or expensive material. Industrial valves may be made of carbon steel, stainless steel, duplex stainless steel and super duplex stainless steel. 

What Factors Determine Valve Material Selection?

The most appropriate material depends on several factors that should be evaluated together before completing the valve specification:

  • Process fluid and chemical composition

  • Corrosion and chloride exposure

  • Operating pressure and temperature

  • Flow velocity and erosion risk

  • Required mechanical strength

  • Body and trim configuration

  • Seat and seal compatibility

  • Applicable material and valve standards

  • Expected service life

The valve body is not the entire scope of the material specification process. Materials for the ball, disc, stem, seat, trim, seals and many more wetted parts of valves could also be different from those of the body.

Process Fluid and Corrosion Compatibility:

The material compatibility with the process fluid is one of the initial steps in selecting the valve material. Properties such as chemical composition, concentration, temperature, pressure, velocity and exposure period can influence the material behavior.

For the general industry applications and hydrocarbons, carbon steel can be used in the conditions which are compatible with the material properties. Where additional protection from corrosion is necessary, stainless steel, duplex stainless steel, super duplex stainless steel and nickel alloy can be selected.

However, there is no material which can automatically be suitable for all corrosive environments. The selection of grade should take into account the fluid composition, chloride concentration and other parameters. Some grades of stainless steel, for instance, can be susceptible to corrosion in the presence of chlorides.

In conclusion, material selection should be performed considering all service conditions.

Pressure and Temperature Requirements:

Corrosion resistance is only one part of material selection. The selected material must also maintain suitable mechanical properties under the required pressure and temperature conditions.

Before selecting a material, the specification should consider:

  • Design pressure

  • Operating temperature

  • Valve pressure class

  • Valve size

  • Body construction

  • Applicable design standard

Material that exhibits good performance in certain types of corrosive environments might not necessarily work at high temperatures or mechanical stress. In the same way, the capability of the valve to withstand high temperature and pressure is dependent on its material and construction.

This becomes especially critical in high temperature and high-pressure environments.

Body and Trim Material Selection:

Valve body and trim materials should not necessarily be identical. Different components are exposed to different mechanical, thermal and process conditions.

The valve body provides the primary pressure boundary, while components such as the ball, disc, stem and other trim parts may be directly exposed to the process fluid. Their material requirements can therefore differ from those of the body.

For instance, a ball valve will feature a carbon steel, stainless steel, Duplex or Super Duplex body, but the ball and stem will depend on the application for which the valve is designed.

Similarly, gate valves and globe valves can also be made using various types of materials. Globe valves need to be paid special attention when selecting the material for the body, disc, stem and seat, owing to high velocity of flow and possibility of erosion.

The same goes for check valves and butterfly valves.

Control valves call for special attention to the material of the body and trim since pressure drop, throttling and high flow velocity can cause erosion and wear.

Seat and Seal Compatibility:

Material selection should also cover the valve's seating and sealing components. Seats, seals and other non-metallic or wetted components may be exposed directly to the process fluid and can have different compatibility requirements from the valve body.

The selected seat and seal materials should be evaluated against:

  • Process fluid chemistry

  • Operating temperature

  • Pressure conditions

  • Chemical exposure

  • Wear and erosion

  • Expected service life

A suitable body material alone does not guarantee that the complete valve will be compatible with the process. The body, trim, seats and seals should therefore be reviewed as part of the complete valve specification.

Carbon Steel vs Stainless Steel Valves:

The choice between carbon steel vs stainless steel valves depends on the process environment, mechanical requirements and required corrosion resistance.

Carbon steel castings such as ASTM A216 Grade WCB are often chosen for industrial and hydrocarbon applications when the process environment is favorable for the material.

In situations when additional corrosion protection is required, stainless steel can be chosen. The alloy of cast austenitic stainless steel is ASTM A351 Grade CF8M, a cast stainless steel grade broadly corresponding to wrought 316 stainless steel, while the CF3M alloy is 316L stainless steel.

However, the choice of stainless steel by itself does not resolve any corrosion problem. The chloride content, temperature and characteristics of the process environment should be taken into account before choosing the specific grade.

Thus, it can be concluded that the choice between carbon steel and stainless steel depends on the process environment.

Duplex and Super Duplex Valve Materials:

Duplex stainless steels have both austenite and ferrite microstructure, combining high mechanical strength and good corrosion resistance. Stainless steel grades UNS S31803 and S32205 could be used for applications where chlorides are present.

Superduplex stainless steel grades like UNS S32750 and S32760 could possibly be used in some applications due to their high strength and corrosion resistance.

These materials could be considered for offshore, subsea, marine and chemical applications. Yet, the suitability of such materials depends on process fluid, presence of chlorides, temperature and mechanical strength requirements.

Understanding Valve Material Grades:

Different material standards define specific requirements for chemical composition, mechanical properties and other characteristics. Common valve material grades relevant to industrial valve construction include:

Material Grade

Material Type

Typical Consideration

ASTM A216 WCB

Carbon steel casting

General industrial and compatible hydrocarbon services

ASTM A351 CF8M

Austenitic stainless steel casting

Applications requiring additional corrosion resistance

ASTM A351 CF3M

Low-carbon stainless steel casting

Applications associated with 316L-type stainless steel

ASTM A995 Grade 4A

Duplex stainless steel

Selected chloride and demanding corrosion environments

ASTM A995 Grade 5A

Duplex stainless steel

Selected applications requiring higher corrosion resistance

ASTM A995 Grade 6A

Super Duplex

More demanding corrosion and strength requirements


Material Selection for Specialised Applications:

Different industries place different demands on valve materials. Rather than selecting materials based only on the industry name, the actual process conditions should be reviewed.

  • Oil & Gas

Carbon steel may be suitable for hydrocarbon applications where the process conditions are compatible with the material. Stainless steel, duplex stainless steel, super duplex stainless steel and other alloys may be considered where corrosion, chloride exposure or other service requirements call for different material properties.

  • Petrochemical & Refining

Material selection depends on the process media, pressure, temperature and chemical exposure. Carbon steel, stainless steel and higher-alloy materials may all be used across different process systems.

  • Chemical Processing

The chemical composition and concentration are very critical considerations in materials selection. Stainless steel, duplex stainless steel, super duplex stainless steel and nickel alloys can be considered appropriate materials for use in certain aggressive process media if proven to be compatible with such an environment.

  • Offshore & Subsea

Seawater, chlorides, and corrosive environments might raise the risk of corrosion. Thus, duplex and super duplex alloys could prove useful for certain valve applications in which they offer adequate strength and corrosion resistance.

  • Power Generation

Carbon steel and alloy materials are widely used in steam and high-temperature systems, while stainless steel and other alloys may be specified for particular corrosive or demanding services.

  • Marine & Shipbuilding

Seawater exposure makes corrosion resistance an important consideration. Stainless steel, Duplex and Super Duplex may be suitable for selected applications depending on the specific operating conditions.

Verifying the Material Specification:

Before finalising a valve specification, the selected materials should be checked against the complete service requirements.

The following should be verified:

  • Process fluid and chemical composition

  • Corrosion and chloride exposure

  • Design pressure

  • Operating temperature

  • Valve pressure class

  • Body and trim materials

  • Seat and seal materials

  • Applicable material standards

  • Applicable valve and design standards

  • Expected service conditions and service life

The most suitable material is not necessarily the most expensive material or the material with the highest general corrosion resistance. The objective is to select materials that provide the required combination of compatibility, mechanical performance and service life for the application.

EuroValve Italia offers valve designs in different material grades for industrial applications, allowing material selection to be considered alongside the valve design and operating requirements.



Expert Valve Guidance
Need Help Specifying the Right Valve?

Our Italian engineering team provides custom valve selection, technical drawings, and project-specific quotes within 24 hours.

Contact Our Engineers