Floating vs Trunnion Ball Valve: Key Differences and Applications

Despite both floating and trunnion ball valves having the attribute of being quarter turn valves, there are differences in the method that the ball is suspended. It makes all the difference to the seating load, ball valve operating torque, and size-pressure range applications. The floating vs trunnion ball valve choice is particularly important as pipeline diameter and pressure increase. EuroValve Italia offers floating and trunnion-mounted ball valve configurations for industrial and pipeline applications. The main difference between floating and trunnion ball valve designs is how the ball is supported inside the valve. In a floating ball valve, the ball is not fixed at its base. Once the valve is shut off, the ball will be forced by the upstream pressure to fit against the downstream seat. In a trunnion mounted ball valve, the ball is mechanically supported by trunnions, limiting its movement under line pressure. The seating arrangement is designed to achieve sealing while the ball remains supported. This difference affects the operating torque and the seat loads of the two valves. Actual size and pressure combinations depend on the valve design and project specification. A floating ball valve is usually employed as a standard isolating valve when the sizing, differential pressure, and torque fall within the range of design specifications. It is utilized in various applications including process pipes, gas lines, water supplies, chemical plants, and general industrial processes. Depending on its construction, the valve may be available with either a full or reduced bore as well as soft or metal seat. Its relatively simple construction can make this valve suitable for compact installations, depending on the size and pressure requirements. Where there is an increase in the diameter and pressure in the valve, the force that acts on the seats and ball becomes considerable. The mechanical assistance provided by using trunnion ball valves can take care of the movement of the ball and its seat load and help lower operating torque, depending upon the valve and operating condition. A high pressure ball valve, used in pipeline operations and where automation of the valve is also required, can adopt trunnion ball valve design. The applications are oil and gas pipeline operations, petrochemical industries, terminals, compressor stations, etc. Size of the valve influences mechanical loading and actuator requirements. A larger ball can generate greater forces at the sealing surfaces, particularly under high differential pressure. In floating designs, this can increase the torque required to operate the valve. Pressure rating should also be checked against operating temperature. The allowable pressure of a valve can change with temperature depending on the body, trim and seating materials. The valve material should match the process fluid and operating conditions. Common material options include: Carbon steel Stainless steel Duplex Super Duplex Nickel alloys for specialised services Seat materials may include PTFE, RPTFE, PEEK and metal seating. Metal seats can be considered for elevated-temperature, abrasive or severe services. For corrosive applications, the ball, stem, seats and other wetted components must also be compatible with the process medium. Bore configuration affects flow through the valve. A full-bore valve provides a passage close to the pipeline's internal diameter. It is useful where low pressure loss or pipeline pigging is required. A reduced-bore valve has a smaller flow passage and may be suitable where some additional restriction is acceptable. End connections must correspond with the piping specification. Depending on the design, valves can be supplied with flanged, RTJ, butt-weld, socket-weld or threaded ends. Face-to-face dimensions should also be checked before installation to ensure the valve fits the existing piping arrangement. Good ball valve selection starts with the actual operating conditions. The main factors to establish are: DN/NPS size Design and operating pressure Operating temperature Pressure differential Full or reduced bore Seat material Body and trim materials End connection Operating torque Manual or automated operation The required construction may then determine whether a floating or trunnion design is appropriate. Alternative designs are available that cater to particular needs. The top entry valve allows entry into the inner parts, while the full weld design is applied for permanent pipelines. Double block and bleed design ensures two separate barriers with bleed or vent in between. Valves with metal seats and cryogenic ball valves are also available. The floating ball valve vs trunnion ball valve decision should be based on the complete operating requirement. In the case of a smaller pipeline, a floating ball valve could do the job well, provided that the differential pressure required is not beyond the valve design capacity. If the pipe is large, and needs automatic opening in case of differential pressure, then a trunnion ball valve may do the job better, provided that the design of the valve can handle such an operation. The operation and construction of the two valves vary although they move in quarter turn fashion. They should thus be chosen according to the application requirements. Construction should fit the pressure, temperature, size and other factors of the pipeline.How Floating and Trunnion Ball Valves Differ?
Floating Ball Valve Applications:
Size, Pressure and Operating Torque:
Materials and Seat Selection:
Full Bore, Reduced Bore and End Connections:
Ball Valve Selection for Industrial Pipelines:
Floating or Trunnion: Which Fits the Pipeline?
Table of Contents


