HomeKnife Gate Valve

Knife Gate Valve

Precision-engineered industrial knife gate valve. Certified Italian manufacturing, high safety standards, and project-ready design.

Knife Gate Valve Manufacturer in Italy

Slurries, suspended solids and fibrous media require an isolation valve capable of closing through process streams that can interfere with conventional seating arrangements. Knife gate valves use a thin gate travelling across the flow path, making them suitable for applications involving sludge, pulp, minerals, abrasive slurry and other solids-bearing media.

EuroValve Italia is a Knife Gate Valve Manufacturer in Italy offering unidirectional, bidirectional, slurry and through-conduit configurations for demanding industrial isolation. Valve construction can be selected according to flow direction, solids concentration, abrasion level, operating pressure, sealing requirement and actuation method.

What is a Knife Gate Valve?

A knife gate valve is an isolation valve that uses a thin gate moving perpendicular to the flow path to open or close the pipeline. The gate edge is designed to travel through media containing suspended solids, fibres, slurry or other process material that may be difficult to handle with conventional isolation valve constructions.

When fully opened, the gate is withdrawn from the main flow path. During closing, it travels through the process medium toward the seat to isolate the line. Knife gate valves are primarily intended for isolation rather than continuous throttling.

Types of Knife Gate Valves

Knife Gate Valve Type Design & Application
Unidirectional Knife Gate Valve Designed to seal primarily against pressure from one direction. Commonly used for wastewater, pulp and paper, mining and general industrial isolation duties.
Bidirectional Knife Gate Valve Designed to provide shut-off against pressure from either flow direction. Suitable where operating conditions can create pressure on either side of the closed gate.
Slurry Knife Gate Valve Designed for abrasive fluids containing suspended solids or high solids concentrations. Sleeve, liner and gate arrangements are selected to withstand abrasion and reduce material accumulation.
Through Conduit Knife Gate Valve Provides an unobstructed flow path when open and is suited to services where solids accumulation, pressure loss or interference with the process stream should be minimised.
Flanged Knife Gate Valve Uses a flanged body arrangement for installation into compatible industrial piping systems and can be configured for different sealing and service requirements.

Technical Specifications

Parameter Technical Options
Valve Function Isolation / Shut-Off
Flow Direction Unidirectional, Bidirectional
Body Style Wafer, Lug, Flanged
Gate Configuration Knife-Edge Gate, Through-Conduit Gate
Seating Metal Seated, Resilient Seated, Sleeved / Lined
Stem Rising Stem
Operation Handwheel, Bevel Gear, Pneumatic, Hydraulic, Electric
Flange Compatibility EN / DIN and ASME drilling according to valve construction
Design Standard MSS SP-81 where applicable
Face-to-Face MSS SP-81 where applicable
Testing MSS SP-151 where applicable

Unidirectional and Bidirectional Sealing

A unidirectional knife gate valve is designed around a preferred pressure direction, with the seating arrangement providing shut-off primarily from one side. Correct installation orientation is therefore important for applicable unidirectional constructions.

Bidirectional designs provide sealing against pressure from either direction. This arrangement is useful where flow direction can change or where pressure may develop on either side of the closed valve.

For slurry service, specialised sleeves or liners can protect selected valve components from abrasive media and help prevent solids from accumulating around the sealing area.

Materials and Grades

Material selection for a knife gate valve should consider the body, gate, stem, seat, liner and packing separately. The gate and sealing components are particularly important in slurry service because they can be exposed directly to abrasive particles, corrosive media and repeated mechanical contact.

Material Family / Component Relevant Materials & Grades
Cast & Ductile Iron Cast Iron and Ductile Iron for applicable water, wastewater, slurry and general industrial constructions
Carbon Steel ASTM A216 WCB and applicable fabricated carbon steel constructions
Stainless Steel 304, 316, 317, ASTM A351 CF8, CF8M and CF3M
Duplex Stainless Steel 2205 / UNS S31803-S32205 and related Duplex grades
Super Duplex Stainless Steel 2507 / UNS S32750 and related Super Duplex grades
Precipitation-Hardening Stainless Steel 17-4 PH for applicable high-strength gate constructions
Nickel Alloys Hastelloy C and Monel for applicable corrosive process services
Titanium Titanium gate options for specialised highly corrosive services
Resilient Seats & Sleeves NBR, EPDM, FKM, Natural Rubber and other compatible elastomers according to service
Abrasion-Resistant Liners Polyurethane and other abrasion-resistant liner materials for slurry service
Seat & Packing Materials RPTFE, PTFE-based packing, graphite and other compatible sealing materials according to temperature and medium

Applications and Industries

Application Typical Requirement
Mining & Mineral Processing Isolation of abrasive slurry, tailings and solids-bearing process streams
Pulp & Paper Handling pulp stock, fibres and process slurries
Wastewater Treatment Isolation of wastewater, sludge and solids-bearing streams
Chemical Processing Isolation of compatible corrosive or solids-containing process media
Power Generation Isolation of ash slurry and applicable process or utility streams
Desalination & Seawater Systems Isolation using corrosion-resistant gate and body materials selected for the actual seawater service
Steel & Metals Processing Isolation of abrasive and solids-containing process streams

Selecting the Right Knife Gate Valve

Knife gate valve selection should consider the process medium, solids concentration, particle characteristics, flow direction, operating pressure and temperature, required sealing direction, abrasion level and material compatibility.

For slurry and abrasive service, particular attention should be given to the gate material, seat or sleeve construction and body liner. Actuation should be selected according to valve size, required operating force, cycling frequency and plant automation requirements.

For technical selection or quotation, provide the process medium, solids content, operating pressure and temperature, line size, flow direction, connection requirements, material requirements and preferred actuation method.

Knife Gate Valve Products
4 products
Through-Conduit Knife Gate Valve
Through-Conduit Knife Gate Valve

Through-conduit knife gate valve with an unobstructed flow passage and manual or pneumatic operation.

Slurry Knife Gate Valve
Slurry Knife Gate Valve

Slurry knife gate valve with abrasion-resistant sealing, linear gate movement and pneumatic or hydraulic actuation.

Bidirectional Knife Gate Valve
Bidirectional Knife Gate Valve

Bidirectional knife gate valve with two-way shutoff, resilient seat options and manual or pneumatic operation.

Unidirectional Knife Gate Valve
Unidirectional Knife Gate Valve

Unidirectional knife gate valve with directional shutoff, resilient or metal seats and manual or pneumatic operation.

Knife Gate Valve Manufacturer in Italy – Slurry Service