HomeBlogBall Valve vs Gate Valve: Which Is Better for Industrial Applications?

Ball Valve vs Gate Valve: Which Is Better for Industrial Applications?

October 20, 20264 min read
Ball Valve vs Gate Valve: Which Is Better for Industrial Applications?


Both Ball Valves and Gate Valves are used for pipeline isolation, but they operate differently. Ball valves provide quick quarter-turn shut-off, while gate valves use a vertically moving closure element. The appropriate choice depends on operating conditions, pipeline requirements and frequency of operation. EuroValve Italia offers both valve types for industrial applications.

Ball Valve vs Gate Valve: Key Differences

There exists a distinction between ball valves and gate valves owing to the way each one controls the flow passage.

In a ball valve, the closure element is spherical in shape with a hole bored on it that rotates 90 degrees for closing and opening of the flow passage.

A gate valve utilizes a closure element that travels vertically within the flow path until it opens, after which it will move away from the flow passage.

Feature

Ball Valve

Gate Valve

Closure element

Spherical ball

Gate

Movement

Quarter-turn

Multi-turn

Main duty

On/off isolation

On/off isolation

Shut-off speed

Fast

Slower

Operating frequency

Generally well suited to frequent cycling

Generally better suited to infrequent operation

Pressure drop

Typically low when fully open, depending on design

Typically low when fully open, depending on design

Installation requirements

Requires suitable clearance for the lever, gearbox or actuator

Requires sufficient space for the stem and operating mechanism

Maintenance considerations

Seat and seal wear may require inspection, depending on service conditions

Gate, seat and stem components may require inspection, depending on service conditions

Automation

Quarter-turn pneumatic or electric actuation

Multi-turn or linear actuation arrangements


Ball Valve Applications and Benefits:

Ball valves are commonly used in applications requiring quick shut-off and positive isolation.

They possess quarter turn actuation that allows them to open and close rapidly, meaning that they are ideal for applications that require frequent opening and closing. Floating Ball Valves are commonly used for isolation purposes, whereas Trunnion Mounted Ball Valves are ideal for large sizes and high loadings.

Gate Valve Applications:

Gate valves are primarily used in pipelines where the valve needs to be open during regular service and closed only for isolation purposes.

These types of valves find extensive application in transmission pipelines, oil and gas industries, processing plants, water systems, and industrial pipelines.

Slab Gate Valves and Expanding Gate Valves are extensively used in pipeline service. Pressure Seal Gate Valves can be used in high pressures and temperatures.

Forged Steel Gate Valves are used in small high-pressure lines, whereas specially designed valves are used in low-temperature applications.

Valve Size, Pressure and Operating Requirements:

Valve sizes influence the design of the body, the operational force required, and the actuator specifications. In large-size ball valves, trunnion support will assist in carrying the weight of the ball and decrease operating torque. Gate valve design is dependent on the size requirement.

Pressure rating should be checked together with operating temperature, since the allowable pressure can vary with temperature and material grade.

Technical Specifications:


Specification

Typical options

Valve size

DN15–DN2000 / NPS ½"–80", depending on design

Pressure class

PN16–PN100; ASME Class 150–2500, depending on construction

Body materials

Carbon steel, stainless steel, Duplex and Super Duplex

End connections

Flanged, butt weld, socket weld or threaded

Relevant standards

API 6D, API 600, API 602, API 608 and ASME B16.34, where applicable



The final specification depends on the valve design, process conditions and project requirements.

Ball Valve and Gate Valve Materials:

Ball valves and gate valves may both be made from carbon steel, stainless steel or any number of alloys, depending upon the application. But it's not only the material that makes for the better choice, but rather the type of duty cycle and seating and pressure and temperature needs.

The body material is only one part of the specification. The closure element, stem, seats and other wetted components must also be compatible with the process fluid.

Ball Valve and Gate Valve End Connections:

This connection needs to comply with the specification of the pipeline as well as installation requirements.

Flanged connections come in handy when the need arises to inspect or maintain the equipment. Butt weld connections form a permanent joint and are frequently used in pipelines.

RTJ connections will be used where it is dictated by the piping specification. Socket weld and threaded connections may also be used on smaller pipelines.

Face-to-face measurements also need to be checked against the current piping layout.

When Should You Choose a Ball Valve or Gate Valve?

The ball valve is the appropriate type of valve to use where there is a process line whose shut off needs to be done automatically often because of its quarter turn. The gate valve could be an appropriate valve for a pipeline which is always fully open.

For ball valve vs gate valve for isolation, the operating pattern is an important consideration. As far as pipeline isolation valves are concerned, it is better to compare not prices but actually the operating duties.

Expert Valve Guidance
Need Help Specifying the Right Valve?

Our Italian engineering team provides custom valve selection, technical drawings, and project-specific quotes within 24 hours.

Contact Our Engineers